MEDIUM APPLIANCE
- Commercial
4x2 or 4x4Cab Chassis, 6 seater
- 5 speed Manual
- 140KW at 2900 rpm
- 520Nm at 1400 rpm
- GVM 9900kg
- 2000L Aluminium water tank
- Fire Pump, 1860 Lpm at 700 kPa
- Foam System Customers Option
- Deliveries 4 x 70mm female BIC (2 per side)
- CAF'S outlets, 2 x 41mm Forestry on the near side, 1 x 41mm Forestry on the
offside
- 30L Class A foam tank
- 30L Class B foam tank
- Auxiliary foam pump to fill foam tanks from the ground
- Modulating float valve to keep water tanks continually full via a 70mm male
BIC coupling at the rear
- 4 BA Cylinder compartments over the wheel arch, 2 per side
- 100mm suction inlet on the nearside
- Manual rewind hose reel complete with 60m of 25mm Boston Booster hose at the
rear
- 11m trussed ladder gallows on the roof
- Suction hose and first story ladder stowage on the roof
HEAVY APPLIANCE
- Commercial
4x2 Cab Chassis, 6 seater
- Allison World Series electronic transmission
- 191Kw at 2000 rpm
- 1180Nm at 1300 rpm
- GVM 13900kg
- Tare 9600kg
- PTO or Hydraulic driven pump 3300-4700Lmp at 700 kPa
- Optional CAF'S, NON CAF'S
- 1300-1500L aluminium water tank
- Mill-Tui Certified BA seats
NON CAFS
- Pump 1000-1250
USGPM
- Two high pressure 90m hose reels complete with electric/manual rewind
- Simultaneous operation, 700 kPa deliveries and 3500kpa hose reels
- Deliveries remote delivery controls for the offside
CAFS
- Pump 1000-1250
USGPM
- Separate PTO drive 350 pump to supply the two high pressure hose reels 350Lpm
@ 2200 kPa
- 3 x 41mm Forestry CAF'S outlets. Two on nearside, one on the offside
- CAF'S and separate water line to monitor via motionless mixers
- All CAF'S controls are located on the nearside pump panel
- Single stainless steel foam tank, 60L capacity
- Auxiliary foam pump to fill foam tank from the ground
- Modulating float valve to keep water tank continuously full via 2 x 70mm male
BIC couplings at the rear
- Suction relief discharges into the water tank
- Pressure relief discharges back to suction
- 230V Engine heater, battery charger
- 230V Invertor to run 230V outlets and two light masts
- 4 BA cylinder compartments over the wheel arch, 2 per side
- 125mm suction each side
- Sight tube on front of water tank and foam tank
- Air suspension on rear axle automatically drops when the pump is engaged
- 11m trussed ladder gallows on the roof
- Suction hose and first story ladder stowage on the roof
- 6x90m feeder hose in pull out tray stored in the rear locker under the water
tank
HAZMAT VEHICLES
- Commercial
4x2 Cab Chassis, 3 seater
- Allison Automatic Transmission
- Tare 9860kg
- Operating Mass 12200kg
- BA Stowage in underfloor lockers
- Scene lighting
- Roof mounted light mast
- Swing up air assisted rear door
- Pull out Awnings on both sides
- All Aluminium constructed body
- Compartment lockers fitted with pullout trays
- Separate air conditioned Instrument Room set up for 2 crew and :Whiteboard
Mobile Phones Television weather Station Computer Laser Printer Microwave
- Sophisticated electrical system to allow vehicle systems to run from either
single phase or 3 phase external 230V supplies or by the onboard hydraulically
driven alternator
- Air conditioning controls in both the Cabin and Instrument Room
- Remote controlled spot light mounted on the Cabin roof